Add initial board, HAL, and executor modules
This commit is contained in:
wang committed
1 parent
3b9e129c88
commit
0b2eebe76d
82 files changed
+20611
No files matched your search
@@ -0,0 +1,544 @@
|
||||
menu "Sweekar Application Configuration"
|
||||
|
||||
# ==============================================================
|
||||
# 模块化配置自动扫描引入点
|
||||
# 这里会自动加载 main/Kconfig.modules 文件
|
||||
# ==============================================================
|
||||
rsource "Kconfig.modules"
|
||||
|
||||
choice BOARD_VERSION_SELECTION
|
||||
prompt "Select Board Version"
|
||||
default BOARD_VERSION_V1_1_11
|
||||
help
|
||||
Select the hardware board version to use.
|
||||
|
||||
config BOARD_VERSION_V1_1_11
|
||||
bool "Board v1.1.11"
|
||||
help
|
||||
Use board version v1.1.11
|
||||
|
||||
config BOARD_VERSION_V1_1_12
|
||||
bool "Board v1.1.12"
|
||||
help
|
||||
Use board version v1.1.12
|
||||
|
||||
config BOARD_VERSION_V1_1_13
|
||||
bool "Board v1.1.13"
|
||||
help
|
||||
Use board version v1.1.13
|
||||
|
||||
config BOARD_VERSION_V1_1_14
|
||||
bool "Board v1.1.14"
|
||||
help
|
||||
Use board version v1.1.14
|
||||
|
||||
config BOARD_VERSION_V1_1_16
|
||||
bool "Board v1.1.16"
|
||||
help
|
||||
Use board version v1.1.16
|
||||
|
||||
config BOARD_VERSION_V1_1_17
|
||||
bool "Board v1.1.17"
|
||||
help
|
||||
Use board version v1.1.17
|
||||
|
||||
config BOARD_VERSION_V1_1_18
|
||||
bool "Board v1.1.18"
|
||||
help
|
||||
Use board version v1.1.18
|
||||
|
||||
endchoice
|
||||
|
||||
choice STEPPER_DRIVER_IMPL
|
||||
prompt "Stepper Driver Implementation"
|
||||
default STEPPER_DRIVER_DRV8428
|
||||
help
|
||||
Select the stepper motor driver chip.
|
||||
|
||||
config STEPPER_DRIVER_DRV8428
|
||||
bool "TI DRV8428"
|
||||
help
|
||||
Use TI DRV8428 stepper motor driver.
|
||||
|
||||
config STEPPER_DRIVER_AW8646
|
||||
bool "Awinic AW8646"
|
||||
help
|
||||
Use Awinic AW8646 stepper motor driver.
|
||||
|
||||
endchoice
|
||||
|
||||
choice LINEAR_MOTOR_TYPE
|
||||
prompt "Linear Motor Type"
|
||||
default LINEAR_MOTOR_LD0832
|
||||
help
|
||||
Select the linear motor type.
|
||||
|
||||
config LINEAR_MOTOR_LD0832
|
||||
bool "LD0832 (1.8V, 235Hz, 21 ohm)"
|
||||
help
|
||||
Use LD0832 linear motor.
|
||||
|
||||
config LINEAR_MOTOR_LD0625
|
||||
bool "LD0625 (0.7V, 260Hz, 8 ohm)"
|
||||
help
|
||||
Use LD0625 linear motor.
|
||||
|
||||
endchoice
|
||||
|
||||
choice AUDIO_DECODER_SUPPORT
|
||||
prompt "Audio Decoder"
|
||||
default AUDIO_SUPPORT_OPUS_DECODER
|
||||
|
||||
config AUDIO_SUPPORT_G711A_DECODER
|
||||
bool "AUDIUO-G711-DECODER"
|
||||
|
||||
config AUDIO_SUPPORT_OPUS_DECODER
|
||||
bool "AUDIO-OPUS-DECODER"
|
||||
|
||||
config AUDIO_SUPPORT_AAC_DECODER
|
||||
bool "AUDIO-AAC-DECODER"
|
||||
|
||||
endchoice
|
||||
|
||||
choice AUDIO_CONVERSATION_MODE_SUPPORT
|
||||
prompt "Conversion Mode"
|
||||
default CONTINUOUS_CONVERSATION_MODE
|
||||
|
||||
config LANGUAGE_WAKEUP_MODE
|
||||
select USE_WAKENET
|
||||
select SR_WN_WN9_HILEXIN
|
||||
bool "LANGUAGE-WAKEUP-MODE"
|
||||
|
||||
config CONTINUOUS_CONVERSATION_MODE
|
||||
bool "CONTINUOUS-CONVERSATION-MODE"
|
||||
|
||||
endchoice
|
||||
|
||||
choice RTC_MODE_CHOICE
|
||||
prompt "rtc mode choice"
|
||||
default COZE_REQUEST
|
||||
help
|
||||
Select rtc request mode
|
||||
|
||||
config COZE_REQUEST
|
||||
bool "enable coze request"
|
||||
|
||||
config RTC_TOKEN_REQUEST
|
||||
bool "enable rtc token request"
|
||||
endchoice
|
||||
|
||||
choice RTC_BACKEND_PROVIDER
|
||||
prompt "RTC backend provider"
|
||||
default RTC_BACKEND_VOLC
|
||||
help
|
||||
Select the RTC SDK backend used by the AI RTC service.
|
||||
|
||||
config RTC_BACKEND_VOLC
|
||||
bool "VolcEngine RTC (current default)"
|
||||
|
||||
config RTC_BACKEND_AGORA
|
||||
bool "Agora RTC (migration target)"
|
||||
endchoice
|
||||
|
||||
menu "Agora RTC Configuration"
|
||||
depends on RTC_BACKEND_AGORA
|
||||
|
||||
config AGORA_SDK_ENABLED
|
||||
bool "Agora SDK integrated"
|
||||
default n
|
||||
help
|
||||
Enable this option after adding Agora RTC SDK headers/libs.
|
||||
|
||||
config AGORA_APP_ID
|
||||
string "Agora App ID"
|
||||
default ""
|
||||
|
||||
config AGORA_TOKEN
|
||||
string "Agora RTC Token"
|
||||
default ""
|
||||
|
||||
config AGORA_CHANNEL
|
||||
string "Agora Channel Name"
|
||||
default "default"
|
||||
|
||||
config AGORA_UID
|
||||
int "Agora Local UID"
|
||||
default 0
|
||||
endmenu
|
||||
|
||||
choice TOUCH_SENSOR_IMPL
|
||||
prompt "Touch Sensor Implementation"
|
||||
default TOUCH_SENSOR_IMPL_ESP
|
||||
|
||||
config TOUCH_SENSOR_IMPL_ESP
|
||||
bool "ESP32 Touch Pad"
|
||||
help
|
||||
Use ESP32 internal touch sensor (via touch_pad).
|
||||
|
||||
config TOUCH_SENSOR_IMPL_AW
|
||||
bool "Awinic Touch Sensor"
|
||||
help
|
||||
Use Awinic AW933xx touch sensor.
|
||||
|
||||
endchoice
|
||||
|
||||
choice BASE_BOARD_COMM_INTERFACE
|
||||
prompt "Base Board Communication Interface"
|
||||
default BASE_BOARD_COMM_UART
|
||||
help
|
||||
Select the communication interface for the base board.
|
||||
|
||||
config BASE_BOARD_COMM_UART
|
||||
bool "UART (Legacy)"
|
||||
help
|
||||
Use UART for base board communication.
|
||||
|
||||
config BASE_BOARD_COMM_I2C
|
||||
bool "I2C (v1.1.16+)"
|
||||
help
|
||||
Use I2C for base board communication.
|
||||
endchoice
|
||||
|
||||
|
||||
config COZE_URL
|
||||
string "COZE-URL"
|
||||
default "http://115.190.92.216:8899/startvoicechat"
|
||||
depends on COZE_REQUEST
|
||||
|
||||
config COZE_AUTHORIZATION
|
||||
string "COZE-AUTHORIZATION"
|
||||
default "af78e3067582ac8c04ba20174410bd1"
|
||||
depends on COZE_REQUEST
|
||||
|
||||
config COZE_BOTID
|
||||
string "COZE-BOTID"
|
||||
default "ep-20241104163951-sdmjc"
|
||||
depends on COZE_REQUEST
|
||||
|
||||
|
||||
config RTC_TOKEN
|
||||
depends on RTC_TOKEN_REQUEST
|
||||
config APPID
|
||||
string "appid"
|
||||
depends on RTC_TOKEN_REQUEST
|
||||
|
||||
config ROOMID
|
||||
string "roomid"
|
||||
depends on RTC_TOKEN_REQUEST
|
||||
|
||||
config UID
|
||||
string "userid"
|
||||
depends on RTC_TOKEN_REQUEST
|
||||
|
||||
config TOKEN
|
||||
string "token"
|
||||
depends on RTC_TOKEN_REQUEST
|
||||
|
||||
config ENABLE_RECORDER_DEBUG
|
||||
bool "enable recorder debug save to sdcard"
|
||||
default "n"
|
||||
help
|
||||
Save the data processed by AEC to the SD card. The saved file name is "rec.pcm", and by default, 30 seconds' worth of data will be saved.
|
||||
|
||||
config ENABLE_OTA_UPDATE
|
||||
bool "Enable OTA Update"
|
||||
default y
|
||||
help
|
||||
Enable or disable OTA
|
||||
|
||||
choice OTA_UPDATE_STRATEGY
|
||||
prompt "OTA Update Strategy"
|
||||
default OTA_MODE_NOTIFY
|
||||
depends on ENABLE_OTA_UPDATE
|
||||
help
|
||||
Select the OTA update strategy
|
||||
|
||||
config OTA_MODE_AUTO
|
||||
bool "Auto Update (Immediate)"
|
||||
help
|
||||
Automatically download and install updates immediately
|
||||
|
||||
config OTA_MODE_NOTIFY
|
||||
bool "Notify Update (Wait for Confirmation)"
|
||||
help
|
||||
Wait for user confirmation before starting the OTA update process.
|
||||
endchoice
|
||||
|
||||
endmenu
|
||||
|
||||
menu "QCloud COS Download Configuration"
|
||||
|
||||
config QCLOUD_COS_QUEUE_SIZE
|
||||
int "COS download queue size"
|
||||
default 20
|
||||
range 1 100
|
||||
help
|
||||
Number of pending COS download messages that can be buffered.
|
||||
|
||||
config QCLOUD_COS_WORKER_COUNT
|
||||
int "COS worker thread count"
|
||||
default 1
|
||||
range 1 4
|
||||
help
|
||||
Number of worker threads for COS download processing.
|
||||
|
||||
config QCLOUD_COS_WORKER_STACK_SIZE
|
||||
int "COS worker stack size (bytes)"
|
||||
default 16384
|
||||
range 4096 65536
|
||||
help
|
||||
Stack size in bytes for each COS worker thread.
|
||||
|
||||
config QCLOUD_COS_HTTP_BUFFER_SIZE
|
||||
int "COS HTTP download buffer size (bytes)"
|
||||
default 32768
|
||||
range 4096 131072
|
||||
help
|
||||
Buffer size used by HTTP read and esp_http_client internal buffer.
|
||||
|
||||
config QCLOUD_COS_ZIP_UNZIP_BUFFER_SIZE
|
||||
int "COS ZIP unzip read buffer size (bytes)"
|
||||
default 32768
|
||||
range 4096 131072
|
||||
help
|
||||
Buffer size used when reading compressed data from ZIP entries.
|
||||
|
||||
config QCLOUD_COS_SD_WRITE_BUFFER_SIZE
|
||||
int "COS SD write buffer size (bytes)"
|
||||
default 32768
|
||||
range 4096 131072
|
||||
help
|
||||
stdio write buffer size for HTTP download and ZIP extraction output.
|
||||
|
||||
endmenu
|
||||
|
||||
|
||||
menu "WiFi Configuration"
|
||||
config ENABLE_HARDCODED_WIFI
|
||||
bool "Enable Hardcoded WiFi Credentials"
|
||||
default n
|
||||
help
|
||||
If enabled, the device will first attempt to connect to the specified WiFi network.
|
||||
If disabled or connection fails, it will fall back to SmartConfig/QCloud provisioning.
|
||||
|
||||
config HARDCODED_WIFI_SSID
|
||||
string "WiFi SSID"
|
||||
depends on ENABLE_HARDCODED_WIFI
|
||||
default ""
|
||||
help
|
||||
The SSID of the WiFi network to connect to.
|
||||
Leave empty to fallback to SmartConfig/QCloud provisioning.
|
||||
|
||||
config HARDCODED_WIFI_PASSWORD
|
||||
string "WiFi Password"
|
||||
depends on ENABLE_HARDCODED_WIFI
|
||||
default ""
|
||||
help
|
||||
The password of the WiFi network to connect to.
|
||||
endmenu
|
||||
|
||||
# Sweekar Demo Selection
|
||||
menu "Sweekar Demo Selection"
|
||||
|
||||
choice SWEEKAR_DEMO_SELECTION
|
||||
prompt "Select Active Demo"
|
||||
default SWEEKAR_DEMO_3
|
||||
help
|
||||
Select which demo to build and run. Only one demo can be active at a time.
|
||||
|
||||
config SWEEKAR_DEMO_2
|
||||
bool "Demo 2"
|
||||
|
||||
config SWEEKAR_DEMO_3
|
||||
bool "Demo 3 - Basic Pet Game"
|
||||
|
||||
config SWEEKAR_DEMO_5
|
||||
bool "Demo 5"
|
||||
|
||||
config SWEEKAR_DEMO_6
|
||||
bool "Demo 6 - Layered Architecture"
|
||||
|
||||
config SWEEKAR_DEMO_7
|
||||
bool "Demo 7 - Microkernel Architecture"
|
||||
|
||||
endchoice
|
||||
|
||||
config ACTIVE_DEMO_NAME
|
||||
string
|
||||
default "sweekar_demo2" if SWEEKAR_DEMO_2
|
||||
default "sweekar_demo3" if SWEEKAR_DEMO_3
|
||||
default "sweekar_demo5" if SWEEKAR_DEMO_5
|
||||
default "sweekar_demo6" if SWEEKAR_DEMO_6
|
||||
default "sweekar_demo7" if SWEEKAR_DEMO_7
|
||||
|
||||
config SWEEKAR_DEMO6_HATCHING5_TVC
|
||||
bool "Use TVC version for Hatching 5"
|
||||
depends on SWEEKAR_DEMO_6
|
||||
default n
|
||||
help
|
||||
If enabled, plays EGG_EMORAISING_HATCHING5_TVC instead of EGG_EMORAISING_HATCHING5_NORMAL during the final hatching stage.
|
||||
|
||||
endmenu
|
||||
|
||||
menu "ESP QCloud Example Configuration"
|
||||
menu "Light development board selection "
|
||||
choice LIGHTBULB_DEMO_DRIVER_SELECT
|
||||
bool "Demo select"
|
||||
default LIGHTBULB_DEMO_DRIVER_SELECT_WS2812 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32H2
|
||||
default LIGHTBULB_DEMO_DRIVER_SELECT_PWM
|
||||
help
|
||||
Select the driver type you want to demonstrate
|
||||
|
||||
config LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E
|
||||
bool "Demo SM2135E"
|
||||
config LIGHTBULB_DEMO_DRIVER_SELECT_WS2812
|
||||
bool "Demo WS2812"
|
||||
config LIGHTBULB_DEMO_DRIVER_SELECT_PWM
|
||||
bool "Demo PWM"
|
||||
endchoice
|
||||
|
||||
config WS2812_LED_GPIO
|
||||
int "WS2812 LED GPIO"
|
||||
default 8 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32H2
|
||||
default 18 if IDF_TARGET_ESP32S2
|
||||
default 48 if IDF_TARGET_ESP32S3
|
||||
default 4 if IDF_TARGET_ESP32C2
|
||||
default 18
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_WS2812
|
||||
help
|
||||
Set the WS2812 RGB LED GPIO.
|
||||
|
||||
config WS2812_LED_NUM
|
||||
int "WS2812 LED NUM"
|
||||
default 1
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_WS2812
|
||||
help
|
||||
Set the WS2812 LED NUM.
|
||||
|
||||
config PWM_FREQ_HZ
|
||||
int "PWM Frequency (hz)"
|
||||
default 4000
|
||||
range 2000 5000
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
|
||||
help
|
||||
Set the PWM Frequency (hz).
|
||||
|
||||
config PWM_RED_GPIO
|
||||
int "PWM Red GPIO"
|
||||
default 10 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2
|
||||
default 15 if IDF_TARGET_ESP32S3
|
||||
default 0 if IDF_TARGET_ESP32C2
|
||||
default 23 if IDF_TARGET_ESP32H2
|
||||
default 25
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
|
||||
help
|
||||
Set the PWM Red LED GPIO.
|
||||
|
||||
config PWM_GREEN_GPIO
|
||||
int "PWM Green GPIO"
|
||||
default 6 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2
|
||||
default 16 if IDF_TARGET_ESP32S3
|
||||
default 1 if IDF_TARGET_ESP32C2
|
||||
default 24 if IDF_TARGET_ESP32H2
|
||||
default 26
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
|
||||
help
|
||||
Set the PWM Green LED GPIO.
|
||||
|
||||
config PWM_BLUE_GPIO
|
||||
int "PWM Blue GPIO"
|
||||
default 7 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2
|
||||
default 17 if IDF_TARGET_ESP32S3
|
||||
default 8 if IDF_TARGET_ESP32C2
|
||||
default 25 if IDF_TARGET_ESP32H2
|
||||
default 27
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
|
||||
help
|
||||
Set the PWM Blue LED GPIO.
|
||||
|
||||
config SM2135E_IIC_CLK_GPIO
|
||||
int "SM2135E IIC CLK GPIO"
|
||||
default 4
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E
|
||||
help
|
||||
Set the SM2135E CLK GPIO.
|
||||
|
||||
config SM2135E_IIC_SDA_GPIO
|
||||
int "SM2135E IIC SDA GPIO"
|
||||
default 5
|
||||
depends on LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E
|
||||
help
|
||||
Set the SM2135E SDA GPIO.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
endmenu
|
||||
menu "Light provisioning network selection"
|
||||
config LIGHT_PROVISIONING_SMARTCONFIG
|
||||
bool "Enable SmartConfig's smart network configuration method"
|
||||
default n
|
||||
help
|
||||
Enable SmartConfig's smart network configuration method
|
||||
|
||||
config LIGHT_PROVISIONING_SOFTAPCONFIG
|
||||
bool "Enable SoftAP's network configuration method"
|
||||
default y
|
||||
help
|
||||
"Enable SoftAP's network configuration method"
|
||||
|
||||
config LIGHT_PROVISIONING_BLECONFIG
|
||||
depends on QCLOUD_ENABLE_BLECONFIG
|
||||
bool "Enable BLE's network configuration method"
|
||||
default y
|
||||
help
|
||||
"Enable BLE's network configuration method"
|
||||
|
||||
config LIGHT_PROVISIONING_SOFTAPCONFIG_SSID
|
||||
depends on LIGHT_PROVISIONING_SOFTAPCONFIG
|
||||
string "SoftAP ssid"
|
||||
default "tcloud_XXX"
|
||||
help
|
||||
SSID (network name) for the phone to connect to.
|
||||
|
||||
config LIGHT_PROVISIONING_BLECONFIG_NAME
|
||||
depends on LIGHT_PROVISIONING_BLECONFIG
|
||||
string "BLE name"
|
||||
default "Qcloud"
|
||||
help
|
||||
BLE for the phone to connect to.
|
||||
endmenu
|
||||
|
||||
config LIGHT_REBOOT_UNBROKEN_COUNT_RESET
|
||||
int "More than this number of continuous uninterrupted restarts triggers a reset of the device"
|
||||
range 3 15
|
||||
default 5
|
||||
help
|
||||
Devices without buttons trigger a device reset through continuous restart.
|
||||
|
||||
config LIGHT_DEBUG
|
||||
bool "The device will be in debug mode"
|
||||
default n
|
||||
help
|
||||
Debug mode device performance is only used during development.
|
||||
|
||||
|
||||
|
||||
choice QCLOUD_WIFI_CONFIG_METHOD
|
||||
prompt "WiFi Provisioning Method"
|
||||
default QCLOUD_WIFI_SMARTCONFIG
|
||||
help
|
||||
Select how the device should connect to WiFi.
|
||||
|
||||
config QCLOUD_WIFI_PROVISIONING
|
||||
bool "WeChat Mini-Program (connectWiFi)"
|
||||
|
||||
config QCLOUD_WIFI_SMARTCONFIG
|
||||
bool "ESP-Touch / SmartConfig (connectWiFi_smartconfig)"
|
||||
endchoice
|
||||
|
||||
endmenu
|
||||
|
||||
Reference in new issue
Block a user