menu "ESP QCloud Example Configuration"
    menu "Light development board selection "
        choice LIGHTBULB_DEMO_DRIVER_SELECT
                bool "Demo select"
                default LIGHTBULB_DEMO_DRIVER_SELECT_WS2812 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32H2
                default LIGHTBULB_DEMO_DRIVER_SELECT_PWM
                help
                    Select the driver type you want to demonstrate

                config LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E
                    bool "Demo SM2135E"
                config LIGHTBULB_DEMO_DRIVER_SELECT_WS2812
                    bool "Demo WS2812"
                config LIGHTBULB_DEMO_DRIVER_SELECT_PWM
                    bool "Demo PWM"
        endchoice

        config WS2812_LED_GPIO
            int "WS2812 LED GPIO"
            default 8 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32H2
            default 18 if IDF_TARGET_ESP32S2
            default 48 if IDF_TARGET_ESP32S3
            default 4 if IDF_TARGET_ESP32C2
            default 18
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_WS2812
            help
                Set the WS2812 RGB LED GPIO.

        config WS2812_LED_NUM
            int "WS2812 LED NUM"
            default 1
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_WS2812
            help
                Set the WS2812 LED NUM.

        config PWM_FREQ_HZ
            int "PWM Frequency (hz)"
            default 4000
            range 2000 5000
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
            help
                Set the PWM Frequency (hz).

        config PWM_RED_GPIO
            int "PWM Red GPIO"
            default 10 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2
            default 15 if IDF_TARGET_ESP32S3
            default 0 if IDF_TARGET_ESP32C2
            default 23 if IDF_TARGET_ESP32H2
            default 25
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
            help
                Set the PWM Red LED GPIO.

        config PWM_GREEN_GPIO
            int "PWM Green GPIO"
            default 6 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2
            default 16 if IDF_TARGET_ESP32S3
            default 1 if IDF_TARGET_ESP32C2
            default 24 if IDF_TARGET_ESP32H2
            default 26
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
            help
                Set the PWM Green LED GPIO.

        config PWM_BLUE_GPIO
            int "PWM Blue GPIO"
            default 7 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S2
            default 17 if IDF_TARGET_ESP32S3
            default 8 if IDF_TARGET_ESP32C2
            default 25 if IDF_TARGET_ESP32H2
            default 27
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_PWM
            help
                Set the PWM Blue LED GPIO.

        config SM2135E_IIC_CLK_GPIO
            int "SM2135E IIC CLK GPIO"
            default 4
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E
            help
                Set the SM2135E CLK GPIO.

        config SM2135E_IIC_SDA_GPIO
            int "SM2135E IIC SDA GPIO"
            default 5
            depends on LIGHTBULB_DEMO_DRIVER_SELECT_SM2135E
            help
                Set the SM2135E SDA GPIO.
    endmenu

menu "Light provisioning network selection"
        config LIGHT_PROVISIONING_SMARTCONFIG
            bool "Enable SmartConfig's smart network configuration method"
            default n
            help
                Enable SmartConfig's smart network configuration method
        
        config LIGHT_PROVISIONING_SOFTAPCONFIG
            bool "Enable SoftAP's network configuration method"
            default y
            help
                "Enable SoftAP's network configuration method"

        config LIGHT_PROVISIONING_BLECONFIG
            depends on QCLOUD_ENABLE_BLECONFIG
            bool "Enable BLE's network configuration method"
            default y
            help
                "Enable BLE's network configuration method"

        config LIGHT_PROVISIONING_SOFTAPCONFIG_SSID
            depends on LIGHT_PROVISIONING_SOFTAPCONFIG
            string "SoftAP ssid"
            default "tcloud_XXX"
            help
                SSID (network name) for the phone to connect to.

        config LIGHT_PROVISIONING_BLECONFIG_NAME
            depends on LIGHT_PROVISIONING_BLECONFIG
            string "BLE name"
            default "Qcloud"
            help
                BLE for the phone to connect to.
    endmenu

    config LIGHT_REBOOT_UNBROKEN_COUNT_RESET
        int "More than this number of continuous uninterrupted restarts triggers a reset of the device"
        range 3 15
        default 5
        help
            Devices without buttons trigger a device reset through continuous restart.

    config LIGHT_DEBUG
        bool "The device will be in debug mode"
        default n
        help
            Debug mode device performance is only used during development.

endmenu